Main Discussion Area > Arrows

Three hacksaw blades

(1/6) > >>

Kegan:
I can't get it to work. The small tangs aren't long enough to hold all three blades. Can someone who uses this show me some pictures of what they use? I've been trying this for about three years, and have never been able to get the darn thing to work :P. I feel I'm missing something very simple, and am gonna kick myself once I realize what it is :).

Coo-wah-chobee:
 Kegan, Kegan, Kegan..............Tape the 3 blades together with electrical tape. Hold on either end then saw away. Ya know saw, saw, saw !  ;D Wow hey this workee good ! :o..........bob

ricktrojanowski:
Kegan-
This is how I did mine.  I taped them offset so that one end is one blade. The center is three blades and the other end is two blades.  Here are some pics.  Hope this helps.

[attachment deleted by admin]

Hillbilly:
Kegan, I could never get the hacksaw blades working to suit me, either. I use a little round rasp that I picked up at a hobby shop somewhere, works great.

mullet:
  I use my band saw or scroll saw. I couldn't get the hack saw blades to stay centered. I then clean them up with a chain saw file.

Navigation

[0] Message Index

[#] Next page