Main Discussion Area > HowTo's and Build-a-longs

Deer Leg Bone Arrowhead - Using Stone Tools

<< < (5/6) > >>

AKAPK:
Thanks for the demonstration, i needed that :) the Primitive way ;)

TRACY:
A lot of time and effort in this post. Thanks Patrick!  Just knocking the dust off some oldies but goodies 8)


Tracy

JackCrafty:
Dang Tracy!  You're diggin' up some old ones!   ;D ;D

Clacker:
Did you ever test that point? How well does it penetrate/hold up to  use?

JackCrafty:
Yes, I tested that point on a cardboard target and it held up very well with almost no damage, except to the very tip, after 4 or 5 shots.

If glued with hide glue, the joint between shaft and arrowhead is very strong.  Pitch glue is much weaker.  I believe I used fish glue for this joint and it did not break or crack.

Navigation

[0] Message Index

[#] Next page

[*] Previous page