Main Discussion Area > Arrows

arrow crester

(1/4) > >>

dshull:
Its me again with another question? I saw a arrow crester in a mag PA I think,that used a sewing machine motor ( wife thinks Im crazy) dose plans for anything like this exist

ricktrojanowski:
Check out the post on new arrows by OctoberSunrise.  He made a sweet arrow crester with a drill motor.  By the looks of his arrows it worked really well.

Justin Snyder:
Sewing machine motors are the best because they spin slow.  Do an internet search and Im sure you will find plans.  Justin

DanaM:
Take a look at this thread, homemade crester using a drill

http://www.primitivearcher.com/smf/index.php/topic,10963.0.html

stickbender:

     How about an old bar b que grill rotisserie motor, with a small diameter copper, or PVC pipe on it, to hold the arrow, with a board, with a notch cut in it to hold the end.  Or you could put those little drawer wheels in it, so it will roll easier.  check the flea markets.  I think you can buy them separately also. ;)
                                                                                 Wayne

Navigation

[0] Message Index

[#] Next page