Main Discussion Area > Primitive Skills
friendship bow circle
Pat B:
Brian, A piece of thin walled PVC pipe works well if there is not to much reflex in the stave. I've used 3" and 4" for shipping bows. Glue a cap on one end and just tape the cap on the other end. Pat
mullet:
Be looking for it Hillbilly.Don't send any of that cold weather with it.Been out this morning fishing in the kayak,a nice balmy 75 dgrs.
mullet:
I just wrap it in shrink wrap,tape it and put an address on it.
Pappy:
Mullet I got it to a growth ring,laid out cut out and straightened Sat.It need a little more tweeking but I should have it ready to go to the next guy mid week.I will post some pictures of where it began and where it is now tomorrow when I get to work.It had a few checks in it ,got most of them out .Looks like it will make a fine bow.
Pappy
mullet:
Fantastic Pappy,I had a stave with great 1/2" growth rings but didn't know at the time if anybody wanted to play with one with a hole in the limb.I wasn't sure about the stave you have,it was an Ebay rip-off stave from 3 years ago.Looking forward to getting Hillbilly's.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version