Main Discussion Area > Arrows

Router jig plans

(1/2) > >>

Uncas:
hello all,
i'm building a jig to make arrows with my router from 1/2 rips, i've searched and read plenty of threads but no pictures. can anyone post pictures of plans of the jig they use

thanks

Diligence:
Highland Woodworking.com has plans for a jig for dowel making.  Look in their Library section...

salad days:
duffontap had a couple of really good pictures in a build along last year. You might be able to search his posts and find it.

Timo:
Here's the one I made several years ago. Still working great today.I use a 3/8 beading bit,(some call it a bull nose bit).Makes alot cleaner shaft out of the doweller.







Here's a lil trick for getting them right. chuck up the shaft in your drill,get a collar from a taper tool started on the shaft,Hold it verticle and let it chase your sandpaper down the shaft.The collar will stick on the high spots. Just sand were needed.I always use 100 grit for this and then finish sand with 180,parrellel.

Uncas:
thank you for the help

Navigation

[0] Message Index

[#] Next page