Main Discussion Area > Around the Campfire
NUTHER KNIFE......GOTTA GET BACK TO BOWS!!!!
boo:
good looking knife, it arta work fine.
never heard of using epoxy on the leather. are you using lighter fluid to thin it? thats what i use when making some of my flyfishing flies.
El Destructo:
Bobby....I didnt say I used epoxy...I said that the Super Sheen is Water Based ....but set up as hard as Epoxy does....the Leather is nice and stiff....and holds the shape of the Blade perfectly
madcrow:
I just got one of the wet/dry bench grinders. One side has a normal stone that turns 3400 rpm's, and the wet side has a 8" X 2" thick wheel that turns 160 rpms. I have not tried it yet, 160 may be too slow.
El Destructo:
I bet the 160 will work....as long as it's geared low...so it has the Power to buff with....3400-3600 is too fast in my Book....I was hoping I could put a Dimmer switch on this one and slow it down....I ain't no Electrician though....so if anyone out there is...and knows....let me know if this is possible....OK??
sailordad:
madcrow:that wet/dry bench grinder,can that be used on rock also? for like grinding forms for FOGing
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version