« previous next »
Pages: [1]

Author Topic: HHB Back  (Read 4610 times)

0 Members and 1 Guest are viewing this topic.

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
HHB Back
« on: March 22, 2009, 12:13:00 am »
Question on HopHornBeam bow. since the back is peeled i know i don't need to chase a ring but the back has the very small ridges running along the length. should i scrape the back smooth or leave the ridges on? thanks, Dan.
Logged
45# at 27"

whitewoodshunter

  • Guest
Re: HHB Back
« Reply #1 on: March 22, 2009, 12:15:58 am »
I my experience I left the ridges there. I just scraped off the bark and there was the back.
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: HHB Back
« Reply #2 on: March 22, 2009, 12:16:19 am »
leave them alone....they will not hurt a Thing....and they add Character too....and by cutting through them...you are in all intent.,...violating the Back of the Bow
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,530
Re: HHB Back
« Reply #3 on: March 22, 2009, 12:18:48 am »
Leave the back alone after the bark is peeled. The ridges is what make HHB so cool as a bow. Also, it will act as camo by reflection the light differently on the ridges and the valleys.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PeteC

  • Member
  • Posts: 2,004
Re: HHB Back
« Reply #4 on: March 22, 2009, 09:14:50 am »
Dan,it's all in what you want.If you want to scrape it smooth,you can back it with silk.If you don't want to back it,leave the back as it is. God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: HHB Back
« Reply #5 on: March 22, 2009, 10:11:41 am »
No, leave it. You may violate back rings. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline sailordad

  • Member
  • Posts: 5,045
Re: HHB Back
« Reply #6 on: March 22, 2009, 11:11:38 am »
     Hi Dan,

nice to see you on here ;D
ya i would just leave the back alone,like they said if you scrape it smooth your violating the back and will need to back it.
i know you can make a sweet bow from it,just be patient and keep coming back and asking questions,and please dont forget those
ever important PICTURES,we love pics.plus they are a great benefit for getting the proper advise.

hell of a hog chad got eh?                keep coming back brother

                                                            peace,
                                                                    tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: HHB Back
« Reply #7 on: March 22, 2009, 11:20:31 am »
I'm with Pat-I like the character of the valleys in HHB. It can be tough getting the cambium out of them, but it looks cool.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,530
Re: HHB Back
« Reply #8 on: March 22, 2009, 11:29:44 am »
...and I'll be the devils advocate here  ;D and say if you harvest in spring after the leaves come out, you peel the bark off and you don't have the problems trying to get the cambium off. ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: HHB Back
« Reply #9 on: March 22, 2009, 11:32:11 am »
Dats Da Ticket....nice and wet with the fisrt Sap....what doesnt peel off clean then....will most likely all come off as you tiller it...sometimes you may have to scotch brite pad some....but I leave it be....I like the looks of it in the crevices.....JMO
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
Re: HHB Back
« Reply #10 on: March 22, 2009, 11:33:45 pm »
Thanks guys, that all i need to know, the back stays just as it is. Now what is the best way to completly remove pencile marks? eraser doesn't seem to get them all off. thanks, Dan.
Logged
45# at 27"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,530
Re: HHB Back
« Reply #11 on: March 23, 2009, 12:10:29 am »
A very light scraping. ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sailordad

  • Member
  • Posts: 5,045
Re: HHB Back
« Reply #12 on: March 23, 2009, 12:27:29 am »
acetone,i have done it,it works wonderfully  ;D
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
Re: HHB Back
« Reply #13 on: March 23, 2009, 07:15:04 pm »
thanks guys, i'll be sure to post pics of the finished product, Dan.
Logged
45# at 27"
Pages: [1]
« previous next »