Main Discussion Area > Arrows

Glue for points?

(1/3) > >>

whitewoodshunter:
What kind of glue do you guys use for applying glue on points? A glue that is cheap?

Cromm:
If you want the point to stay on no matter what I use a 2 part epoxy glue, don't use hot melt glue because if you are shooting into alot of 3D's the friction of the arrow going into the target, warms the glue back up and the head comes off. That will not happen with the epoxy glue.....
Thanks for your time.

hawkbow:
I use the ferrile tite... hot glue.. have never lost a point while hunting.. YET... the trick is to heat it up good and press until the glue hardens.. Hawk

boo:
I have used ferrile tite for years and never have problems with my field tips coming off in three d targets. The trick is to clean the inside of the point with alcohol on a Q-tip first to get rid of the oils they put on them so they wont rust while on the shelf or in storage. Then do as Hawkbow said and heat it up real good and keep pressure on till cools. This also makes it easy to remove the point when the time comes. 

Pat B:
I use the amber Ferr-l-tite.

Navigation

[0] Message Index

[#] Next page