Main Discussion Area > Around the Campfire
Buffalo Drop Bone Handled Neck Knife
huntertrapper:
B A utiful
DanaM:
Dang Mike thats a purty little guy. Pump base shim eh, what thickness was it?
I've given up on trying to make them scratch free, besides it just adds a little character and saves
the owner the trouble of scratching it up ;) ;D Got a few new ones in da works myself :)
El Destructo:
Thanks HT...Dana......Tim I use an 8 inch Grinder with a medium Wheel to remove most of the Metal...then I use a 120 grit Flapper Wheel mounted in a Die Grinder to slightly Hollow Grind the Blades Edge....Dana ...this started out with a 150 thousanths thick (approx. 5/32)Stainless Steel Shim that was 6 X 6 inches
madcrow:
Great little knife. Maybe he will get some blood on it this fall. Hopefully not his.
El Destructo:
--- Quote from: madcrow on March 28, 2009, 08:36:07 pm ---Great little knife. Maybe he will get some blood on it this fall. Hopefully not his.
--- End quote ---
Funny You should bring that up!!! I got myself good on that Knife while Buffing the Blade out!!!
[attachment deleted by admin]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version