Main Discussion Area > HowTo's and Build-a-longs
Having trouble with your scraper?
Justin Snyder:
For anyone interested, I went down to the local welding shop today to get some metal for trade points. While I was there I got a 24"X8" piece of stainless sheet metal and they used their shear to cut it to scraper sized pieces. I came out with 6 4"x8" stainless scrapers plus a piece for points for $3. I also asked about high carbon steel (like band saw blades) for more points and they gave me 3 old blades from their saw that are 1"x 8' long. It might be worth a trip to your local welding or metal shop. Justin
DanaM:
ttt
osage outlaw:
This is such a great How-to post I thought I would bring it back up to the top for the newer members to see.
son of rooster:
thanks for this info, I know what I am doing tomorrow 8)
Kalvek:
This is just what I was looking for! I'm glad that this was brought to the top, even as old as it is. The only thing I wish was that the images were still intact on the original post. Everywhere I was looking people kept showing that you needed a diamond/oil/water stone for the sharpening process -- I'm glad that isn't the case (less money that I have to spend getting one shipped, since nobody nearby has one that I know of).
Navigation
[0] Message Index
[*] Previous page
Go to full version