Main Discussion Area > Arrows

legal size

(1/3) > >>

Bone pile:
I have made a few arrows ,mostly for targets and to gain knowedge on how to build a good one.my question is this,I know there are dementions for a legal hunting arrow.I live in Fla. Here are a few heads I've knapped out,just want to have an measurement goal before I make too many


thanks
Roger

DanaM:
Every state varies as to their rules or if they even allow stone points. Those look good to me send em up and I will see how they work ;) :)

Pat B:
Most state regs I've read, if they allow stone points, a minimum width of 7/8" and no barbed points. The point on the left would be considered a barbed point. If you bring the back corners straight across the back, like the others,  they will be OK.  I'm not sure what FLA law says.

TRACY:
No min. requirements for flint,chert, all metal, or obsidian projectiles in Indiana. Min. draw weight of 35lbs.

african man:
Some real nice points you've made there ....  :o
definitely not the right size so you'll have to send them to me ....  ::) they look about right for here.

Chris ...  ;)

Navigation

[0] Message Index

[#] Next page