Main Discussion Area > Arrows

cane?

<< < (2/2)

El Destructo:
Been doing that since I messed with Cane...the ones for your old CXL's and other Skinny Carbons work great

Hillbilly:
If your cane is more than 3/8" or so, it probably spines about a hundred pounds or has a really sharp taper, one. If it's a tad too big for a 23/64 point, just bring the last inch or two down to a small enough diameter to fit in the taper tool, no biggie. You can glue a little piece of dowel or bamboo skewer in the end if the walls are thin/hole is too big to get a good taper. The insert points like Little John makes from nails work great, too.

gutpile:
just foreshaft your cane and mount your stuff to the foreshaft..it will add weight to the front and they will fly better too...gut

Pat B:
I just taper with a belt sander and glue on the point just like any other arrow.

Navigation

[0] Message Index

[*] Previous page