Main Discussion Area > Bows
Southern Community Bow
Pat B:
Good! Your suggestions sounds good. The buffalo nut shafts have a large pith that will probably have to be plugged. It is tough stuff but will split lengthwise. If it does split, a little super glue and a wrap will fix it. Until they are finished, the spine can be adjusted by scraping or sanding along the middle of the shaft. Also for every inch over 28" you can subtract 5# of spine weight and the natural taper of the shafts can give 10# or so of reduced spine weight. Pat
ps. The heads aren't obsidian. Cowboy knows what they are.
Justin Snyder:
;D ;D I didn't mean obsidian, I meant stone. You can tell what kind of stone I have access to. Justin
Pappy:
Looks like every thing is coming along nicely,great job to all,so far. :)
Pappy
bullcreekboy:
I have some good news. The tracking number shows that it arrived in town this morning so I should have it this afternoon. ;D
GregB:
Outstanding! Looking forward to see it after you get through, know you'll do a great job! ;)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version