Main Discussion Area > HowTo's and Build-a-longs

Take down sleeve build along.

<< < (3/3)

Dano:
Yep, you da man Pappy!!

ricktrojanowski:
Thanks for sharing Pappy,  I'm planning on a takedown for one of my next bows.  This info will help a whole bunch.

bigcountry:
Pappy, thanks a bunch for the build.  I am getting ready to made a broken limb to a billet yew bow. 

I was wonderin if thier is any advantage to only gluing on one brass insert, and leaving the other as an extra, then gluing on the metal sleeve directly to the other limb? 

Pappy:
Probably be OK either way.I always use both sleeves then glue the brass to the steel on the top limb.It will give you a little shelf.Just be sure to get the steel and brass flush at the top when you glue it up. I leave the bottom when it will slide apart.By doing this It don't mess with the shelf or arrow pass area when you take it apart. Good luck.I love mine.It gives them a little more weight and seem to shoot really nice and stable. :) I have made 4 like that and they all shot nice. :)
   Pappy

natty:
NICE!! i always wondered how to do it

Navigation

[0] Message Index

[*] Previous page