Main Discussion Area > Arrows

Dowel maker

<< < (2/3) > >>

kayakfisher:
Thats pretty cool was that just a block of wood and a hacksaw blade.
                                                                     Dennis

Swamp Bow:
Probably not a "hacksaw" blade, I would guess a piece of one of the Japanese pull saws.  But that is what it looks like to me, real simple.  I just don't know how even the shafts would be.  Be a good set up if you are going to taper your shafts anyway I imagine.

Swamp

Justin Snyder:
I have the Versitas Tapered Tenon Cutters from Lee Valley and I like them. I have tried several different methods similar to that video and I guarantee they aren't as easy as he makes them look. Also, if you push it through on an angle like he was on the big one, you get a lot of variation in size.

Swamp Bow:
I was wondering about that.

Swamp

kayakfisher:
I ordered the one for 30 dollars will  it adjust down to 5/16 or is three eights as small as it goes
                                                      Dennis
                                             

Navigation

[0] Message Index

[#] Next page

[*] Previous page