Welcome, Guest. Please login or register.
March 11, 2010, 10:37:15 PM

Login with username, password and session length
Search:     Advanced search
202000 Posts in 12438 Topics by 3049 Members
Latest Member: sonofthebattlechief
* Home Help Search Calendar Login Register
+  Primitive Archer
|-+  Main Discussion Area
| |-+  Bows
| | |-+  Pecan log--Bark on or nbark off?
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Print
Author Topic: Pecan log--Bark on or nbark off?  (Read 215 times)
Pappysc2001
Member

Offline Offline

Posts: 3


« on: February 08, 2010, 04:27:44 PM »

New shopping center going in around the corner. I stopped and asked the guy cutting all the very large Pecan trees down what they are going to do with the wood. Afetr a few minutes of negatiation I carted off a 8-9" 7 foot pecan log. I am going to quarter it for slef bow. My question is shopuld I cure it with the bark on or the bark off?
Thanks for any info
Ted
Logged
Lombard
Member

Offline Offline

Posts: 201


« Reply #1 on: February 08, 2010, 07:38:32 PM »

Ted, I am working a pecan stave now. Just moved to short string. Now on this little bow I left some of the bark on, and when tillered to about twenty inches I heard the terrible sound crack. Turned out to be just the bark popping off. This is my first Pecan, and it has been drying for almost a year, in the attic. Don't know if it is normal for the bark to pop off like that, but I will remove all the bark from the stave on the next one.
Logged

“I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it.” Thomas Jefferson

Communications Gypsy since 1985.
Lombard
Member

Offline Offline

Posts: 201


« Reply #2 on: February 08, 2010, 07:40:49 PM »

Sorry Ted, meant to add that, the next green wood I get I'll remove the bark, and then coat the back and ends with shellac.
Logged

“I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it.” Thomas Jefferson

Communications Gypsy since 1985.
Pat B
Global Moderator
Member

Online Online

Posts: 11312


« Reply #3 on: February 08, 2010, 11:17:55 PM »

The bark will be holding fast this time of year. It will probably be easier to remove it now then when dry. I would seal the back if you do remove the bark, just in case. Be sure you store it will so rot doesn't set in.  Wink
Logged

Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pappy
Global Moderator
Member

Offline Offline

Posts: 8596

if you have to ask you wouldn't understand ,Tenn.


« Reply #4 on: February 09, 2010, 04:55:48 AM »

I would treat it like Hickory or most other white woods. Smiley
   Pappy
Logged

Clarksville,Tennessee
Pappysc2001
Member

Offline Offline

Posts: 3


« Reply #5 on: February 09, 2010, 08:23:15 AM »

Thanks for all the feedback. One more quick qustion. Should I treat it with insecticide before putting it away to cure?
Logged
Pappy
Global Moderator
Member

Offline Offline

Posts: 8596

if you have to ask you wouldn't understand ,Tenn.


« Reply #6 on: February 09, 2010, 09:27:56 AM »

I would for sure if you leave the bark on,it wouldn't hurt if you take the bark off,better safe
than sorry. Smiley
   Pappy
Logged

Clarksville,Tennessee
Hillbilly
Global Moderator
Member

Offline Offline

Posts: 7011

I like tater tots.


« Reply #7 on: February 09, 2010, 10:10:21 AM »

If you get the bark off, you don't have to worry about insects. If you leave the bark on, it'll look like Swiss cheese in a few months. Yank the bark off and seal the back.
Logged

Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.
wodpow
Member

Offline Offline

Posts: 77


« Reply #8 on: February 09, 2010, 04:22:36 PM »

true I think the young borers have to have the bark to get a start in but i have had staves that were stored bark off and still found borer damage from the little guys that were already in the wood thats why I spray my staves with poison i have used it way stronger then the recommended  strength and covered it with plastic drop  till I want to start carving and use gloves till I get the outer wood off or you could take a pressure washer and get the poison off I guess
Logged
Pappysc2001
Member

Offline Offline

Posts: 3


« Reply #9 on: February 09, 2010, 05:46:38 PM »

Thanks again guys. I went ahead and de-barked, sealed back and ends and I will fumigate as a just in case measure. I live in that land of many pecan trees, but no one ever cuts them down, let alone sells you a $20 log. That is why I am being so careful. Staves will get put up tomorrow and then brought out maybe around ......Thanksgiving.
Logged
Pages: [1] Print 
« previous next »
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.251 seconds with 23 queries.