Main Discussion Area > Arrows
Shafts at Home Depot
aero86:
El destructo, are you using the shaft in the tapered way? Big end pointy end small end nock end? I'm just making sure ur post kinda jumbled me up
Canoe:
Howdy Group,
El D., I'll be shopping for those smaller boo shafts; (1/4" - 5/16" at the small ends). Also, thanks for the paper tuning tutorial.
It's almost lawn and garden season at the HD, where they'll be putting out all those gardening supplies - including fresh bunches of garden stakes. I'll be there.
Thanks for your help guys,
Canoe
hillbilly61:
I tried to straighten a few this morning. I used a propane torch. Had trouble with one out of 4. Three turned out to be pretty straight. My question is the torch scorched it a bit, is this normal? Also what about the nodes. Do you sand them flush?
El Destructo:
--- Quote from: aero86 on February 14, 2010, 11:00:03 am ---El destructo, are you using the shaft in the tapered way? Big end pointy end small end nock end? I'm just making sure ur post kinda jumbled me up
--- End quote ---
Thats exactly right...read above...Steve (Hillbilly) hit it right on the Nose too.....
zenmonkeyman:
El D, just to clarify, here...
TBB III pg 230 shows underspined arrows shooting off to the left and overspined to the right. Is that a goof-up?
Garett
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version