« previous next »
Pages: 1 [2]

Author Topic: 2nd self bow  (Read 4786 times)

0 Members and 1 Guest are viewing this topic.

Offline Okie

  • Member
  • Posts: 601
    • Bear Creek Selfbows
Re: 2nd self bow
« Reply #15 on: February 11, 2010, 12:30:47 pm »
If the crack doesn't open up I wouldn't worry about it. I agree with rounding the edges... but I believe most of our 2nd bows were a little blockish.Tiller looks real good.
Logged
Take a kid huntin' (If not who'll drag your deer out when you get old)
<---------<<<Founding Member Oklahoma Selfbow Society>>>-----------> Vice President OSS

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: 2nd self bow
« Reply #16 on: February 11, 2010, 12:39:26 pm »
looks good!   :) -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Diligence

  • Member
  • Posts: 362
Re: 2nd self bow
« Reply #17 on: February 11, 2010, 12:53:29 pm »
good point Pappy...hadn't considered that (i.e drilling thru the tension layer versus natural growth around a defect).

Logged
"Always do your best and to everyone be kind and good" - Ernst Hjalmer Selin (1906-2000)....my grandfather's words of advice he wanted me to tell my children.

Offline Badger

  • Member
  • Posts: 8,119
Re: 2nd self bow
« Reply #18 on: February 11, 2010, 01:00:49 pm »
  Great job, especially for a second bow. Steve
Logged

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: 2nd self bow
« Reply #19 on: February 11, 2010, 03:04:26 pm »
Got your osage bow all bookmarked for Feb Self BOM fun if that's all right with you.
Logged
When you're retired, every day is Saturday

Offline gilbarbarian

  • Member
  • Posts: 40
Re: 2nd self bow
« Reply #20 on: February 11, 2010, 03:23:17 pm »
Thanks guys,  It is 66"ntn and pulls 60# at 28".  On rounding the edges is that on both the back and belly, and will that change the draw weight?  The bow feels kinda heavy, any way to lower it without effecting the draw weight?   Every good action and every perfect gift is from God. James 1:17
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,509
Re: 2nd self bow
« Reply #21 on: February 11, 2010, 03:25:12 pm »
Generally the edges are dead weight anyway. If it does loose any it will be very little.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline gilbarbarian

  • Member
  • Posts: 40
Re: 2nd self bow
« Reply #22 on: February 22, 2010, 02:33:01 pm »

The bow was and is still alittle heavy, so I shortened it by 4in and retillered.  62" ntn , 61# @28"  Hopefully it's not too short.  jeff
Logged

Offline medicinewheel

  • Member
  • Posts: 3,618
Re: 2nd self bow
« Reply #23 on: February 22, 2010, 04:48:16 pm »
That's an awsome tiller! - Very well done, hard to believe it's only your second selfbow!!!
Logged
Frank from Germany...

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: 2nd self bow
« Reply #24 on: February 22, 2010, 06:48:51 pm »
Really nice. Great job on that. Round the edges and put some superglue in the crack. I wouldn't drill either. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Postman

  • Member
  • Posts: 1,154
Re: 2nd self bow
« Reply #25 on: February 22, 2010, 11:44:42 pm »
Nice tiller and good job on the redo! 62" + 61# = great huntin' bow!
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline Canoe

  • Member
  • Posts: 238
  • Progress - Not Perfection
Re: 2nd self bow
« Reply #26 on: February 23, 2010, 12:26:29 pm »
Howdy GilBarb.,

That's an outstanding tiller you got there!!  And, it'll make for a fine huntin' weapon.

Great job all around.

Thanks for Sharing,
Canoe





[attachment deleted by admin]
« Last Edit: February 23, 2010, 01:02:59 pm by Canoe »
Logged
"Nature is a mutable cloud which is always and never the same."  - R. W. Emerson

"Wilderness is not a luxury, but a necessity of the human spirit."    -Edward Abbey
Pages: 1 [2]
« previous next »