Main Discussion Area > Arrows
points come off?
Hillbilly:
I usually degrease them with acetone, and often put them on with two-ton epoxy.
Pdwight:
Super glue holds the world together ;D
mullet:
Yep ;D , you gotta degrease them.
El Destructo:
Degrease them....drill a pinhole in them...squirt the Hot Melt (not no cheapo Craft Store Hot Melt either) in the Tip....push on and twist...hold downward pressure till the Glue sets...this is important...because they can and will push back up....and to keep from losing them in a Styrofoam Target...now this is ElDestructo's Patented Recipe here...no stealing this Guys.......OK...... :P...I take a Liquid Shoe Polish Applicator Bottle...or an empty Absorbine Junior Bottle (my Favorite) and fill it full of Armoral...then just swab Your Arrow Shafts down good with this...let them dry...do it again....and I will Guarantee you ...that they will pull out of a Styrofoam Block like nothing else you have used....just remember to do it every other outing or so....try it and see.....but remember who taught you this Secret..... ;)
sailordad:
ive used wax for that purpose
but Mike,i like your idea even better ;D
promise i wont ever take credit for it when people ask "what the hell ya doing there and why?"
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version