Main Discussion Area > HowTo's and Build-a-longs
gum tree flatbow build along
youngbowyer33:
looks good but i think there might be some limb twist near the tip
blades7558:
i steamed the bow and bent it over an old propane tank and clamped it in place over night. that took out some of the set. it looks as if its at 1 inch now. here are some pics of my steamer and clamp set up. i belive with the exception of sanding and lacquering the bow is complete. yes young it did have some limb twist in both ends the steam took out a little but i learned a lesson for next time. when i dry the bow out for the first time i will clamp it to a flat board. other wise im not concerned about it.
[attachment deleted by admin]
youngbowyer33:
sweet. looks great
Navigation
[0] Message Index
[*] Previous page
Go to full version