Main Discussion Area > Arrows

Point orientation

<< < (2/3) > >>

Pat B:
For hafted points I cut the point slot the same orientation as the nock slot. Less confusing for me that way!  ::)  For glue on points I position them however they are when the arrow spins true. The direction is irrelevant IMO.

billy:
It doesn't really matter to me how my points are oriented.....but then again the points I usually shoot are small that they are tough to see anyway! 

Pappy:
Same as Eddie. For the same reason.  :)
   Pappy

Hillbilly:
I don't think it matters from a flight perspective-the arrow is going to start spinning almost as soon as it leaves the string, anyway. I've done them both ways, usually mount them vertically.

Mechslasher:
like mullet, i do mine horizontal.  with a vertical - wide two blade, planning might not be an issue but mounting it horizontal, it's one less thing to worry about.  i did notice the other day while practicing that one of my screw on heads came out vertical and at 25 yards the top edge of the broadhead is where arrow hit everytime.

Navigation

[0] Message Index

[#] Next page

[*] Previous page