Main Discussion Area > Arrows

just an idea

(1/4) > >>

natty:
read a post on homemade dowlers that used a block of wood with a sawzall blade clamped to the wood  next to a hole that had been drilled in it.got me to ah thinkin that 2 is better than 1. basicly u drill hole then cut right up to the hole then clamp sawzall blade to wood. u make two blocks like that then screw them one on top of the other with hole lined up to another board with a support block between top and bottom boards. just make sure to leave enough space on middle blade to let shavings out. make sure to drill hole in 3rd board it dont work well with out it ;D. i aint that good at writing so some of this might be confusing ???

JW_Halverson:
I ain't here to read, post pics.   :P

sailordad:
i dont mind reading ifn i get a pic or two to look at along the way  ::)
sounds like a good idea,but i cant "PICTURE" it on my own  ;D

natty:
going to try not sure when though

JW_Halverson:
Seriously, make sure you post some pics when you get a chance.  It sounds interesting.

Navigation

[0] Message Index

[#] Next page