Author Topic: Bang went the Bow  (Read 3106 times)

0 Members and 1 Guest are viewing this topic.

Grunt

  • Guest
Bang went the Bow
« on: August 02, 2010, 01:50:20 pm »
Heres some shots of a busted linen/ red oak board bow. It was too narrow, 11/2 and too short 61" for the draw I was going for 55# at 28" I probably could have tillered it a bit better also. This is the first red oak board bow I have had chrysalis.It was dead dry and the cell structure looked like it was brittle. Home depo wood. Should have made a 40# D bow out of that board. Enjoy

[attachment deleted by admin]

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Bang went the Bow
« Reply #1 on: August 02, 2010, 01:51:59 pm »
...ouch.  Hate to see that, Grunt.  Time to start the next one!   :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline luke the drifter

  • Member
  • Posts: 171
Re: Bang went the Bow
« Reply #2 on: August 02, 2010, 02:07:46 pm »
dude,

i know exactly wht you are going through.  one has to really search for the best and even that is not a guarantee.  better luck on the next one.

Offline Del the cat

  • Member
  • Posts: 8,294
    • Derek Hutchison Native Wood Self Bows
Re: Bang went the Bow
« Reply #3 on: August 02, 2010, 04:21:08 pm »
Yeah, it does look as dry as a teenage boy's toothbrush.
Del
Health warning, these posts may contain traces of nut.

Offline NTProf

  • Member
  • Posts: 250
Re: Bang went the Bow
« Reply #4 on: August 02, 2010, 05:05:06 pm »
I have made a number of bows from Hope Depot red oak. I keep it 1 3/4 to 2 inches wide and 68-70 inches long, and I have never had any problems.

Offline Gordon

  • Member
  • Posts: 3,299
Re: Bang went the Bow
« Reply #5 on: August 02, 2010, 05:23:10 pm »
The wood might have been dry, but those chrysalis on the belly point to the real reason the bow blew.
Gordon

Offline Del the cat

  • Member
  • Posts: 8,294
    • Derek Hutchison Native Wood Self Bows
Re: Bang went the Bow
« Reply #6 on: August 02, 2010, 06:12:09 pm »
The wood might have been dry, but those chrysalis on the belly point to the real reason the bow blew.
Caterpillar infestation! ::)
Del
Health warning, these posts may contain traces of nut.

Offline chasing crow

  • Member
  • Posts: 269
Re: Bang went the Bow
« Reply #7 on: August 02, 2010, 06:25:19 pm »
Makes me cry a little. Go to the next one.
We know more than we think we do. Pass your knowledge on to our youth

Offline sailordad

  • Member
  • Posts: 5,045
Re: Bang went the Bow
« Reply #8 on: August 02, 2010, 07:08:53 pm »
im with Gordon on this

chrysallis shows what the problem was
too little wood doing to much work in to little an area(bendy to much in that spot)
like ya said,should have tillered it a little better

like others have said,ontp the next one  ;)
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Bang went the Bow
« Reply #9 on: August 02, 2010, 08:46:18 pm »
Yup, chrysals. You know what Ole Jawge says, LOL. If you ain't breakin' you ain't makin'! Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Grunt

  • Guest
Re: Bang went the Bow
« Reply #10 on: August 02, 2010, 10:26:28 pm »
I also believe I was asking the bow to do too much for it's length and width and stiff handle. I have a 1x7x72 dead straight red oak from Home Depot that will make three 2" wide by 68" pyramid bows with 6" handle sections.  I'll get more wood working in the next few ones.