Main Discussion Area > Arrows

any specs for a homemade fletching burner?

(1/2) > >>

blades7558:
does any one have specs on a homemade fletching burner? im no electrician and don't want to attempt to make on with out a layout.

Pat B:
You can make one using a soldering gun but I don't have plans.

osage outlaw:
I have been looking into the same thing.  One design I saw uses an old model train transformer and thin wire.  Another one uses a battery charger and thicker ribbon.  Google "making a feather burner" and see what you get.

osage outlaw:
Or, check this out.  I might have to try this one.  Looks pretty simple.

http://www.piratesofarchery.net/bb/viewtopic.php?f=7&t=3893&st=0&sk=t&sd=a

Stefan:
Check the link, this is one i made and it works just fine. Ribbons you can get at 3rivers archery, just put 12v on them to get it hot (car battery, transformer) And DO NOT USE INDOORS  ;D

http://www.primitivearcher.com/smf/index.php/topic,20291.msg279071.html#msg279071

greetings

stefan

Navigation

[0] Message Index

[#] Next page