« previous next »
Pages: [1]

Author Topic: Piking an osage bow  (Read 1778 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
Piking an osage bow
« on: November 07, 2010, 10:09:29 pm »
Hey guys, I know the answer to this probably varies from situation to situation, but I just piked and heat treated an osage bow that was one of my first bows. It was in the low 30 pound range and was 65". I Piked er down to 60" and heat treated the belly, introducing a little reflex in the process. I haven't been able to bend it yet because I am waiting for it to rehydrate, but I'm anxious to know how much weight it picked up.
Anyone care to venture a guess?
Logged

Offline woodstick

  • Member
  • Posts: 899
Re: Piking an osage bow
« Reply #1 on: November 07, 2010, 10:54:49 pm »
i would say bout 15 to 20 #. i have to do that to some of mine.
Logged
a drawn bow is a stick 9/10 broken

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Piking an osage bow
« Reply #2 on: November 07, 2010, 11:43:37 pm »
I did about 3" on one a few weeks ago and got a little less than 10lbs.  I didn't heat treat it but I did put in some reflex.  Keep your eye on the tiller at 60" if your handle is stiff.  You'll want all the limb working.

Good luck,
George
Logged
St Paul, TX

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,507
Re: Piking an osage bow
« Reply #3 on: November 08, 2010, 12:10:00 am »
Looking forward to seeing your results.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: Piking an osage bow
« Reply #4 on: November 08, 2010, 12:17:36 am »
Thanks guys! this is good news because this may turn into a good hunting bow! i'll keep you all updated
Logged
Pages: [1]
« previous next »