Main Discussion Area > HowTo's and Build-a-longs

Indexer on self nocks

(1/4) > >>

NTD:
Anyone have any good ideas for an idexer for arrows with self nocks?

adb:
A small dab of 5 min epoxy.

Cromm:
I have glued a small bead onto the side of the nock. Every once in a while you will break them off but they are easy to glue back on.
Thanks for your time

jonathan creason:
Baking soda and super glue sets up immediately like a brick.

Pat B:
I usually put a drop of TBIII or Duco on and when it skins over I turn the arrow so the glue dot points down and let it set. Gravity holds it until the glue sets and it leaves a pronounced dot which makes a good index.
  Another method that some of the oldtimers used was to make one side of the self nock a bit shorter than the other and this worked as an index.

Navigation

[0] Message Index

[#] Next page