Main Discussion Area > Arrows

some BIG sawblades...arrowheads and knife blades

(1/4) > >>

half eye:
Fellas,
     Here's some stuff I'm making up from some 40 foot bandsaw blades. The steel is .080" thick, and 1" X 2" broadheads weigh about 143 grains. Sent some out to some PA members, but wanted to see how the stuff works. Enjoy the pics.
rich

hillbilly61:
 Very cool Rich!!! I bet they are some meat stickin blades ;D

Sparrow:
Wow !  Nice.  There are fine knives in there too.  '  Frank

Pat B:
Rich, I'd bet the arrow heads would be bone splitting at that thickness and weight! How much do they weigh?

half eye:
Pat... the heads that are 1" X 2" weight 143 grains (depends on how ya grind the edge)......but if ya was to cut tangs on them, or go to 1-1/4" X 3" it's pretty easy to get 'em in the 200 grain range. So far the steel looks like it would handle the longer length.....without folding the tip on impact.

Hillbilly, your gonna find out shortly, sir. Think they would be hell on pigs too.

S/F,   that one in the photo is a little 3-1/2 inch dressing and skining blade I'm doin up for the deer woods.
rich

Navigation

[0] Message Index

[#] Next page