« previous next »
Pages: [1]

Author Topic: Saw Blade Points (3" point pic added)  (Read 2574 times)

0 Members and 1 Guest are viewing this topic.

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Saw Blade Points (3" point pic added)
« on: January 01, 2011, 07:02:51 pm »
 Got a 6 of these points from half eye. I put a single bevel on each side. All that's left is to hone them to that meat cuttin sharpness ;D Also sent me quite a few 1 1/8 x 8" pieces of the same steal ;) I'm going to try my hand at making a knife out of a couple pieces and the rest I'll cut to points like this one ;) Thank you very much Rich. I'll put them to good use ;D
This one is 123 grains


This one is 3" long and 1" wide. 212grains
« Last Edit: January 04, 2011, 05:23:35 pm by hillbilly61 »
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline Bill Skinner

  • Member
  • Posts: 384
Re: Saw Blade Points
« Reply #1 on: January 01, 2011, 08:29:07 pm »
You have got a month of deer season left, I want to see some of those points painted red.  Bill
Logged

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: Saw Blade Points
« Reply #2 on: January 01, 2011, 08:29:20 pm »
Yep he sent me some of that stuff too.  I cant wait to make some blades and points from it.  I am also thinking about making a scraper from one of the pieces.
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Saw Blade Points
« Reply #3 on: January 01, 2011, 09:23:25 pm »
I don't see any reason that it won't make one. I've been honing the edge on this one and OMG. That is some good steel!!!
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline half eye

  • Member
  • Posts: 3,300
Re: Saw Blade Points
« Reply #4 on: January 01, 2011, 10:12:20 pm »
Hillbilly,
     Never got to hunt pigs yet but I'd sure like to know how them heads hold up to that. For what it's worth I know for a fact that they will cut beef cattle ribs in half and will also penetrate the shoulderblade on one and they did not get so much as a nick on 'em.
rich
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,507
Re: Saw Blade Points
« Reply #5 on: January 02, 2011, 01:27:40 am »
With that thick of steel you could probably make a 1"x3"  broadhead with the worry of the tip bending over. Single bevel, tonto tip and pigs look out!  :o
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Saw Blade Points
« Reply #6 on: January 02, 2011, 08:47:34 am »
Quote from: Pat B on January 02, 2011, 01:27:40 am
With that thick of steel you could probably make a 1"x3"  broadhead with the worry of the tip bending over. Single bevel, tonto tip and pigs look out!  :o

If they can do that half eye. The pigs will just fall over dead just fromm looking at them ;D ;D

LOL..Thanks Pat... Rich and I had talked about that ;) Soon as I get the chance( tonight?) I'm going to cut out a couple and see what they look like.
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2
Pages: [1]
« previous next »