Main Discussion Area > Arrows

adding weigh to cane shaftst..

<< < (2/2)

PeteC:
Aero,I do it all the time. With a lot of my switchcane,the spine is sufficient,but too light in weight. You can dip with poly or paint,but I generally use brush on oil based paints to weight up the shafts.With a little practice,you can can nice even coats,that will usually increase weight by 20 grains or more per coat. If you need to add 100 grains,it's no big deal.JMHO  God Bless

PeteDavis:


I drilled the pith and inserted solid-core solder to front weight behind my stone points. Used a grain scale to weigh the segments.

It works and helps with overspined arrows.

PD

Navigation

[0] Message Index

[*] Previous page