Author Topic: Super Reflex  (Read 2883 times)

0 Members and 1 Guest are viewing this topic.

Offline Hrothgar

  • Member
  • Posts: 1,477
Super Reflex
« on: December 31, 2010, 07:15:38 pm »
I just wanted to share a couple of pics of this red mulberry stave I cut and split in late September. It was slightly curved when cut, but has reflexed a lot as it dried. Stave length is 68" The tips are 5 1/4 " higher than the center plane.
" To be, or not to be"...decisions, decisions, decisions.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Super Reflex
« Reply #1 on: December 31, 2010, 07:45:42 pm »
Awesome. I once had a osage stave like that one. Broke it, I think just from having so much stress on the back from being reflexed. Or it could of just been poor workmanship on my part. Awesome stave though.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline NTD

  • Member
  • Posts: 1,771
Re: Super Reflex
« Reply #2 on: December 31, 2010, 08:08:18 pm »
Wow, That should be fun ;D
Nate Danforth

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: Super Reflex
« Reply #3 on: December 31, 2010, 10:42:26 pm »
They say red mulberry makes a good bow.  Maybe should have debarked it so it might not have reflexed so much.
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline sailordad

  • Member
  • Posts: 5,045
Re: Super Reflex
« Reply #4 on: January 01, 2011, 12:36:12 am »
looks like its already at brace height  :o

how muh relfex is that? looks to be about 6" or so
might have to take some out of it just so yo dont come in way under weightt
that much heavy reflex could be realy fooling tryin to tell when to brace it
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Super Reflex
« Reply #5 on: January 01, 2011, 12:41:41 am »
Starting out with that much reflex can be detrimental to the bow and to you. First off that stave needs to be evened out quite a bit. After finding a back ring I would put an even reflex of about 3" in it and go from there.
  Take the bark and sapwood off and see what ya got!  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ohma

  • Member
  • Posts: 279
Re: Super Reflex
« Reply #6 on: January 01, 2011, 11:08:24 am »
good luck with that and keep us posted on your progress.
if your not dead you are getting older so get out and shoot some arrows.

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Super Reflex
« Reply #7 on: January 01, 2011, 12:17:52 pm »
Pat, you are making it sound like work! I wonder if I could shorten this several inches and attempt a hungarian-style selfbow?
" To be, or not to be"...decisions, decisions, decisions.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Super Reflex
« Reply #8 on: January 01, 2011, 12:36:09 pm »
You could remove wood from the right end and get a more even bend...but that much reflex is difficult to work with.IMO  The first thing you need to do is remove the bark and sapwood(unless you intended to use the sapwood too). This way you can see what you have to work with. If you cut it off before exposing your back ring you might be surprised with what is under the bark and sometimes that is not good.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline markinengland

  • Member
  • Posts: 698
Re: Super Reflex
« Reply #9 on: January 01, 2011, 01:45:23 pm »
What ever you do with that bit of wood I know it will make interesting reading! Should have an interesting early draw weight.

Offline NTD

  • Member
  • Posts: 1,771
Re: Super Reflex
« Reply #10 on: January 01, 2011, 02:30:47 pm »
I have limited experience with staves but if it was me I would cut it into billets and splice in deflex at the handle and make me a Marc St. louis jobbie  ;D
Nate Danforth

Offline sulphur

  • Member
  • Posts: 321
Re: Super Reflex
« Reply #11 on: January 01, 2011, 02:39:11 pm »
a single layer or sinew will help break the bow in while tillering.  a know from experience that, that much reflex will most likely explode for no apparent reason.  dont overly rehydrate the sinew before you put it on, u don't need anymore reflex.  just wet it down and lay it on.  once the bow is tillered most of the way you can most likely remove it or leave it on as you wish.