Main Discussion Area > HowTo's and Build-a-longs

Eric Krewson's tillering "Gizmo"!

(1/2) > >>

Pat B:
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=125;t=001047

skyarrow:
thanx for the link pat

jonathan creason:
This is another great tool to add to your box.  It really helped me tiller out a board bow over the weekend.

Steve Milbocker:
After you initially set the device do you maintain that setting through the entire tillering process?

Pat B:
Steve, the more the limb bends the deeper the piencil has to go through to be able to leave a mark. I will set it shallow to start with, run it down both limbs and remove the pencil marks them reset it a bit deeper and go again. Be sure that both limbs are bending to each setting before resetting it.
  Another use I have found is if you slide the gizmo down each side of each limb it will help with correcting twist that came about from uneven wood removal.   I don't use Eric's gizmo too much but in tricky tillering I find it to be very useful getting good tiller when my eye won't pick it up.

Navigation

[0] Message Index

[#] Next page