Main Discussion Area > Arrows

Round Hacksaw Blade For Self Nocks

(1/4) > >>

PeteDavis:


Is there a preferred blade to cut in self nocks? The .05" blade looks like it will do the job.

PD

NTD:
I use the basic ceramic tile blade and then finish up with sandpaper.  Works for me ;)

mullet:
 I use a chain saw file and a very small half-round rasp.

Pat B:
I use a single bandsaw cut then open it with a thin blade knife and sandpaper. The tile saw works well too. I could never get a hacksaw blade or blades to work well for cutting nocks.

cracker:
I use the saw on my pocket tool and follow up with the file on the same tool. Ron

Navigation

[0] Message Index

[#] Next page