« previous next »
Pages: [1] 2

Author Topic: Short rawgide maple pyramid  (Read 5104 times)

0 Members and 1 Guest are viewing this topic.

Offline Peacebow_Coos

  • Member
  • Posts: 811
Short rawgide maple pyramid
« on: January 11, 2011, 02:54:24 am »
54" tip to tip, 2.25 at the fades to 1" at the tips.  Just sawzall'd it out, it's 7/16" thick at the handle because of a beveled table saw cut.  Is this thick enough for a 60 pound bow?  Long enough?  I'm hoping to pull a couple of inches of reflex in with the rawhide but it's so thick now I was thinking of shaping it first.  I really want an elk bow though, and the rings go [=] with the back being the top of that.  A few v grain marks but the side grain is fairly straight, only one run off, and it's partial.  I would appreciate any input, just hoping for some advice before I make too many shavings.
Thanks
Sam
Logged

Offline bobnewboy

  • Member
  • Posts: 329
  • https://www.flickr.com/photos/bob_d14/
    • The Company of Sixty Field Archers
Re: Short rawgide maple pyramid
« Reply #1 on: January 11, 2011, 06:02:18 am »
Hi Sam,

as I'm sure someone will soon say, a picture is worth a thousand words!
Logged
"The Englishman takes great pride in his liberty. He values this gift more than all the joys of life, and would sacrifice everything to retain it. The populace would have you understand there is no country in the world where such perfect freedom can be enjoyed, as in England!" Frenchman, London 1719

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,821
  • if you have to ask you wouldn't understand ,Tenn.
Re: Short rawgide maple pyramid
« Reply #2 on: January 11, 2011, 07:21:55 am »
What draw length are you looking for ? That pretty short .
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline aznboi3644

  • Member
  • Posts: 802
Re: Short rawgide maple pyramid
« Reply #3 on: January 11, 2011, 09:05:26 pm »
If you see any "V"s on the back of the bow than that is a major grain violation.

I'd scrap the board or back it with wood
Logged

Offline bucksbuoy

  • Member
  • Posts: 116
Re: Short rawgide maple pyramid
« Reply #4 on: January 11, 2011, 09:12:08 pm »
raw hide doesnt shrink when it dries so your not gonna get any reflex from it.
Logged
Its only wood

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Short rawgide maple pyramid
« Reply #5 on: January 15, 2011, 05:08:49 am »
Thanks for the input guys.  There are a few v's running down the length, and off the side on one limb.  What kind of wood would you suggest to back it with?  I've got a hickory board, but it's sawn in a similar fashion.  I figured that as long as the side grain was fairly uniform I'd be alright?  I actually stretched the rawhide last time and it pulled a couple of inches in when it dried, but could have been because it was a super thin kid's bow.  I hate to scrap any wood, I'd just as soon make some shavings and see how things turn out.  I'm hoping for at least a 26-27" draw, but I'll settle for less if I can keep some draw weight.  Thanks for the input fellas, I really appreciate it.  Also, on a pyramid handle, do you make concave lines or straight fades; does it matter?  I was thinking that would make the thinnest part in the middle which would be bad news? }{  Like that, or _/.  Thanks again for your time.
Logged

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Short rawgide maple pyramid
« Reply #6 on: January 15, 2011, 08:28:38 am »
     Buck has it right only sinew will do that it will also adds some weight
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Short rawgide maple pyramid
« Reply #7 on: January 15, 2011, 09:27:00 am »
Is this a board or log stave. 54" is short. 7/16 is thin. You may have to glue on a handle. Pics please. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline aznboi3644

  • Member
  • Posts: 802
Re: Short rawgide maple pyramid
« Reply #8 on: January 15, 2011, 01:27:01 pm »
54" with a 26" draw is pretty short...string angle is going to be right around 90 degrees at full draw.

Shortest 26" draw bow I've made is 50" N2N but its only 30lbs
Logged

Offline okiecountryboy

  • Member
  • Posts: 502
Re: Short rawgide maple pyramid
« Reply #9 on: January 16, 2011, 08:32:03 am »
Hey Pard
you will get a lot more feedback from these ole pros with pics.

God bless
Ron
Logged
God, honor, country, bows, and guns.

Offline medicinewheel

  • Member
  • Posts: 3,618
Re: Short rawgide maple pyramid
« Reply #10 on: January 16, 2011, 09:30:18 am »
Quote from: bobnewboy on January 11, 2011, 06:02:18 am
....
as I'm sure someone will soon say, a picture is worth a thousand words!

...now that you say it...!  ;D ;D ;D
Logged
Frank from Germany...

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Short rawgide maple pyramid
« Reply #11 on: January 17, 2011, 03:13:03 am »
This is of the handle grain from the edge.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Short rawgide maple pyramid
« Reply #12 on: January 17, 2011, 01:46:08 pm »
Your picture didn't show. You should try tinypic.com It works great. Just upload and copy and paste the stuff under where it says for forums or something like that.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Short rawgide maple pyramid
« Reply #13 on: January 17, 2011, 09:30:51 pm »
Side view

Profile

Limb v's
Logged

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Short rawgide maple pyramid
« Reply #14 on: January 17, 2011, 09:32:04 pm »
That last one is of the belly
Thinking of rawhide with a trapped back to leave the maple wide and strong?
Logged
Pages: [1] 2
« previous next »