Author Topic: Are all serving tools the same?  (Read 2033 times)

0 Members and 1 Guest are viewing this topic.

longhunter1

  • Guest
Are all serving tools the same?
« on: January 17, 2011, 09:17:00 pm »
I'm Just getting into making my own bow strings and would like to know which serving tool is worth the mony or are they basically the same.
Is there a big difference in the serving string?

Any feedback is appriciated, Thanks......

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Are all serving tools the same?
« Reply #1 on: January 17, 2011, 09:22:07 pm »
I have several kinds and in my view, they are NOT the same. I perfer the kind in the picture attached. For me it gives better control on tension. As for serving, i use brownell twisted nylon.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Are all serving tools the same?
« Reply #2 on: January 18, 2011, 07:29:15 am »
Thats the one that I use.
I started out with nothin' and I still got most of it left

Offline Auggie

  • Member
  • Posts: 652
  • redneck engineer
Re: Are all serving tools the same?
« Reply #3 on: January 18, 2011, 07:39:59 am »
The serve-tite  shown in bev's post is good,but would like to say that I just got another recently from 3rivers and it just has a regular wing nut on it and doesn't hold tension as well. A trip to the hardware store fixed it.
laugh. its good for ya

Offline Eric Krewson

  • Member
  • Posts: 5,326
Re: Are all serving tools the same?
« Reply #4 on: January 18, 2011, 10:22:07 am »
I have made about a zillon strings in the last 20 years, well, maybe only a half zillion. I prefer the server shown in the picture above.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,530
Re: Are all serving tools the same?
« Reply #5 on: January 18, 2011, 10:31:16 am »
I use a "Little Spinner" srring server. I have bought cheap ones and was not satisfied. I also just used a fat rubber band around the serving thread spool and it worked OK.  Adjustable tension is the trick to a good server.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

longhunter1

  • Guest
Re: Are all serving tools the same?
« Reply #6 on: January 18, 2011, 08:48:35 pm »
Thanks for your input.  Its nice to know that when you need info there's someone that can guide newbee's in the right direction.
I hate to buy something that doesn't work.
 My hard earned pay does not go as far as it used to.

Longhunter.......

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,875
  • if you have to ask you wouldn't understand ,Tenn.
Re: Are all serving tools the same?
« Reply #7 on: January 19, 2011, 10:54:01 am »
I also use one like is in the picture,have for over 30 years,they will last forever. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline oneeye

  • Member
  • Posts: 118
Re: Are all serving tools the same?
« Reply #8 on: January 19, 2011, 11:08:56 am »
The one I use is different than the picture, its black. ;D

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,875
  • if you have to ask you wouldn't understand ,Tenn.
Re: Are all serving tools the same?
« Reply #9 on: January 19, 2011, 11:33:33 am »
Mine also. ;) ;D ;D
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good