« previous next »
Pages: 1 [2]

Author Topic: cutting bone and antler  (Read 19204 times)

0 Members and 1 Guest are viewing this topic.

brian melton

  • Guest
Re: cutting bone and antler
« Reply #15 on: February 05, 2011, 05:57:25 pm »
Or Rudderbows  ;D
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: cutting bone and antler
« Reply #16 on: February 05, 2011, 07:47:24 pm »
I've cut lots of antler on my bandsaw, and it is awful hard on the blade, dulling it quick. What I do is cut a bunch just before I decide to scrap the old blade.
Logged

Offline medicinewheel

  • Member
  • Posts: 3,618
Re: cutting bone and antler
« Reply #17 on: February 06, 2011, 03:41:35 am »
That's actually a helpful idea, thanks adb!
Logged
Frank from Germany...

Offline okie64

  • Member
  • Posts: 1,134
Re: cutting bone and antler
« Reply #18 on: February 06, 2011, 10:55:22 am »
I cut mine on my miter saw.  I hold the antler with a pair of channelocks.  Works good.
Logged

Offline shikari

  • Member
  • Posts: 167
Re: cutting bone and antler
« Reply #19 on: February 06, 2011, 06:13:21 pm »
the reason i bought my bandsaw was for cutting horn for my composites,the stuff is extremely dense and you need a good sharp blade if you are doing precise stuff.For cutting horn lams for the composites i prefer a sharp new blade with plenty of tpi as I can cut more precisely.I would definately invest in the better blades if you plan on cutting horn and antler a lot and it does slip if you re not careful.
Logged

Offline artcher1

  • Member
  • Posts: 1,114
Re: cutting bone and antler
« Reply #20 on: February 06, 2011, 07:18:42 pm »
Yep, antler is sure hard on the blade. I keep a few old blades around for cutting the stuff. .........Art
Logged
Pages: 1 [2]
« previous next »