Main Discussion Area > Bows
You reckon I can fix this?
jkekoni:
You can make another limb and Z or W slice and glue it to the handle.
(Providing that the other limb did not break too. That also sometimes happen, if the broken
limb starts a dry fire.
Or use takedown tube.
May not be easier that making a new one, but definitely possible.
You may counter the too much reflex, by putting some deflex in the handle.
Marc St Louis:
If you dry heat bend or heat treat a bow you should always wait a few days to let the wood hydrate back up because the back is what can let go if you don't.
Navigation
[0] Message Index
[*] Previous page
Go to full version