Main Discussion Area > Primitive Skills
Flute build along
stickbender:
Excellenat sound byte. Thanks.
Wayne
HatchA:
--- Quote from: stickbender on March 10, 2011, 05:24:14 am --- Excellenat sound byte.
--- End quote ---
Strangely "calming" thanks for posting it :)
Catahoula:
Hi Michael,
Excellent work and demonstrations...I do my holes a little differently as I was taught by a boo flute maker...I measure from the backwall of the TSH to the fundamental (root) and then divide by 2...drop down a bit and then multiply .075 times the length and that gives me the distance between the holes...yep, might be confusing... ya'll use Michael's method...you will find it is the same as mine just dressed up in different language!
Rand
Michael C.:
Done with this one now to get back to the branch :)
Talon bit is made from cocobolo with some more bone I used for the sound edge inlay sandwiched between the tip of cocobolo. I'll have to wait till the sun gets up to take some better photos.
Got some of the Malachite that Rand suggested while I was over in Navajo and Hopi country (it's probably from India though) :)
Some daytime photos
Lee Slikkers:
Dang, a Salmon...sweet work! Love everything about it!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version