« previous next »
Pages: 1 [2]

Author Topic: Intro and Question  (Read 4509 times)

0 Members and 1 Guest are viewing this topic.

Offline Postman

  • Member
  • Posts: 1,154
Re: Intro and Question
« Reply #15 on: March 27, 2011, 01:11:58 am »
Quote from: Acutus on March 26, 2011, 10:57:02 pm
Thanks all for the warm welcome! ;D

Think I'll try the beeswax as I'm a beekeeper and have a good supply. I'd like to use bear grease but don't see whereI'd come by that too easily.

YI12, already checked your post ;)

Set a hive out in the woods, make a honey trail,  and wait with your new bow   ;D

welcome and good luck - lots of great people and info on here.
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: Intro and Question
« Reply #16 on: March 27, 2011, 01:33:14 am »
Bien ejido Actus!!! I lurked in the shadows of this site for five years before joining. Great place, good folks and an overflow of ingenuity!!!
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline Keenan

  • Member
  • Posts: 4,824
Re: Intro and Question
« Reply #17 on: March 27, 2011, 01:43:35 am »
Welcome Acutus, Looks like ya got your question answered. looking forward to seeing some of your creations. ;)
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Intro and Question
« Reply #18 on: March 27, 2011, 10:52:41 am »
If I want to go primitive then I finish with grease heated in with a hat gun. If not, I'll use a water based stain and  3 coats of spar urethane. Osage gets 3 coats of Tru Oil to seal the pores and 3 coats of spar urethane. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: 1 [2]
« previous next »