Main Discussion Area > English Warbow

white ash build along (finally done( this time for real))

<< < (8/30) > >>

Pat B:
I generally heat treat anytime after floor tiller but before the bow is stressed too much.

fishfinder401:
nice to know that wood tips wouldn't work that way :) before i tried it, besides a little work reducing it a little, i wont get much done until the weekend, so i have a week to gather information
and thanks for letting me know about that site, i think i have seen it before, but didnt relize it was for ash, so that helps so much more than you could realize, especially with dimensions given
thanks for the help everyone ;D i really appreciate it and value all your opinions
noel

Elktracker:
Ill be watchinggggg :o good luck fish some great advise on here as said earlier by pat and dad I might need to go back and read it now and again to keep my self in bow building check, I sometimes have the urge to want to hurry allong. Also on  the heat gun I think I got mine for 12 dollars at harbor freight and it seems to be holding up well and I have put some hrs on it too :o Gets pretty cold down in the dungen ;D and most of the wood I seem to gather needs lots of heat straightening. Good luck

Josh

fishfinder401:
the one im looking at is probably the same one at my local harbor freight  ;D

Elktracker:

--- Quote from: fishfinder401 on March 31, 2011, 06:34:59 pm ---the one im looking at is probably the same one at my local harbor freight  ;D

--- End quote ---

Good investment ;)

Navigation

[0] Message Index

[#] Next page

[*] Previous page