Main Discussion Area > English Warbow

white ash build along (finally done( this time for real))

<< < (14/30) > >>

fishfinder401:
this is soo scarry doing this with low ceilings :-[, i also learned to secure it to the stick with a rope because i was pulling down, directly underneath and it slid off :'( :'( :'( :'( :'( :'( :'(, ouch, directly onto my head, luckily iy was only around 30lb draw weight there ;D
noel

RyanY:
The left limb looks pretty good but the right looks like it's bending more mid limb. What was the approx. draw weight at that distance?

fishfinder401:

--- Quote from: ryoon4690 on April 07, 2011, 04:15:23 am ---The left limb looks pretty good but the right looks like it's bending more mid limb. What was the approx. draw weight at that distance?

--- End quote ---
ya im trying to take that slight hinge out a little at a time to keep as uch weight as i can, im not exactly sure of the weight, as it stretches the tillering string too much to acuratly reed it. it at where im guessing it will be braced at, but my clossest estimate at the point its pulled to is around 50-60, which sounds right for the brace height of this weight bow, i might be wrong though on the weight, im not the most experienced as far as who many bows iv'e made
noel

Ian.:
Looking good so far im sure you know how to remove a hinge so I wont comment on that,

Del the cat:
With all those tools in the background it looks like one of those spot the difference pictures.
I got it! the saw is missing in pic3..
Del
(You didn't go back and look did you >:D?)

Navigation

[0] Message Index

[#] Next page

[*] Previous page