Main Discussion Area > English Warbow

white ash build along (finally done( this time for real))

<< < (19/30) > >>

fishfinder401:
ok, good to know, now to find my nock cutting file, i swear i saw it a few days ago ???
noel

fishfinder401:
ok, bought a new file, shaped the nocks and i just put on the glue ;D
ill hopefully have pics of  it braced tomorrow when it is dried
thanks for looking
noel

fishfinder401:
 >:( by now the tips had enough time for the epoxie i used to set so i went to check how they looked >:( >:( >:( >:( >:( one of them looked like it wasn't on all the way, so i looked and sure enough, for some reason is scooted down around an eighth of an inch, luckily it wasn't completely dry so i could pull it off but this means i have to clean the tip, get out the epoxy and re epoxy it. i was really looking forward to bracing it tomorrow but it looks like that may not happen
noel

fishfinder401:
ok, sorry for the delay, but hear in order is the top nock, bottom and most of the bow in comparison to an 8ft fishing rod i jsut recently completed( pats self on back ::))
i stilll havent strung it yet becasue i am a little nervous stringing for a first time ;) but once i do ill show
by the way would a maple backed oak combo work for a d belly warbow of around 80lbs, my brother wants to get back into archery and im going to build him one
thanks for looking
noel

Ian.:
That's looking good, after all this we do need some full draw pictures, what is the weight?

Navigation

[0] Message Index

[#] Next page

[*] Previous page