Author Topic: 50" Crow double curve - trade w/ thomas h........(not for bom) Dimensions added  (Read 17094 times)

0 Members and 1 Guest are viewing this topic.

Offline PatM

  • Member
  • Posts: 6,737
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #15 on: April 10, 2011, 12:00:29 pm »
Wouldn't be surprised if the artifact is strung backwards since no Plains bow I know of has that deflex/reflex profile.
 No reason why it doesn't work either way although authenticity is questionable.

Offline ohma2

  • Member
  • Posts: 960
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #16 on: April 10, 2011, 12:07:30 pm »
very nice Rich and you are a lucky man tom.

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #17 on: April 10, 2011, 01:30:26 pm »
Another nice one Rich.
Jeff
Genesis 27: 3

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #18 on: April 10, 2011, 01:46:24 pm »
Very nice Rich.  You paint some nice artwork.
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline half eye

  • Member
  • Posts: 3,300
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #19 on: April 10, 2011, 06:37:25 pm »
Thank you again for the nice comments.
Pat@ I'm aware of the museums going for the backwards string placement, especially on the "gull-wings" but I believe the bow I posted the pic of is in the correct attitude for at least two reasons. First; the static tips maintain their reflexed position at brace, and I'm sure the Native bowyer did not deflex the tips. Secondly; the designs are only on one side, and as pictured that is the back of the bow which I believe to be correct. Thats why I took the bow's attitude at brace to be correct. Recently I also found some strange shaped self bows and am offering those pics , because I never saw the like of them either......I'm starting to think there are whole lot of bow styles I'm not even familiar with.

Hope ya guys like these "different bow types, maybe ya allready seen them. #1; A Wintun (poss. Patwin) from central Clifornia   #2, Olympic Salish self bow (note the diamond fineals)  #3; A R/D Sioux which to me looks like are "modern" static recurves.
rich

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #20 on: April 10, 2011, 07:09:16 pm »
Yep,  ,what can  I say! another quality NA bow, dont see as it could be strung opposite....    Rich, you could  kit out a whole tribe single handed...
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Lombard

  • Guest
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #21 on: April 10, 2011, 07:42:08 pm »
Looks good from here.

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #22 on: April 10, 2011, 10:11:15 pm »
i really like that last one !!

Offline JBL

  • Member
  • Posts: 108
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #23 on: April 11, 2011, 12:38:51 am »
As always Half Eye just AMAZING!!!!!  Bravo!!!

Offline medicinewheel

  • Member
  • Posts: 3,618
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #24 on: April 11, 2011, 03:03:33 am »
Very nice work as always!
Frank from Germany...

Offline dwardo

  • Member
  • Posts: 1,456
Re: 50" Crow double curve - trade w/ thomas h........(not for bom)
« Reply #25 on: April 11, 2011, 09:13:06 am »
I have to give this bow style a shot.
Can i ask for some rough dimensions and cross section imformation please? I have access to lots of ash to try them out.

Thanks and they are all lovely bows.

Offline half eye

  • Member
  • Posts: 3,300
Fellas,
     Here are the dimensions for this bow.....white ash, steam bent. I did not build the bow to these dimensions, they were just taken off of the finished bow.

50-1/8" ntn
1.38" wide at grip (4" long)
.77" wide at the tip, straight taper from the grip to tip
.525" thick at the grip (no identifyable "fade" )
.450" thick at mid limb
.41" thick at base of the recurve
.455" thick from base of recurve to tip.

Offline half eye

  • Member
  • Posts: 3,300
I'm sorry, I forgot the question about "cross-section"....the bow has a lowcrown back and belly with squared-off edges. The wood is quartersawn Northern Ash (tight ringed)
rich

Offline Parnell

  • Member
  • Posts: 5,551
Wonderful bow, Rich, as always.
1’—>1’

Offline dwardo

  • Member
  • Posts: 1,456
Thanks for all the info :)