Main Discussion Area > Bows
Sister staves
Pappy:
They do work good.Got the first sister finished tillering yesterday.I will have some pictures of the tiller in a day or 2 as soon as I get someone to take them for me.It turned out 53@26 and worked
out pretty good.Put about 25 arrows through it and it held about 1 in. of backset right after
unstrung and about 2 after a little rest.I only started with about 3 so thats pretty good.It also
shoots hard and hits where you look.Had a little shock but I hadn't thinned the tips yet.
I thinned them down quite a bit but haven't shot it again to see if it helped.I think it will.
Now for it's twin. :)
Pappy
makete:
Sounds like you are just having a blast. Wish I was there to watch all that fun.
Pappy:
Finely got around to getting some pictures.I had to tweak the tiller a little after shooting it some so see what you think.Got the skins glued on also ,now just need a grip and seal and sister 1 will be done ,hopefully this week. :) Also a couple of pictures of sister 2 on the tillering stick it had a hump
in the upper limb witch made it tough to see the tiller but it is coming along.See what yall think.
Pappy
[attachment deleted by admin]
Pappy:
The first picture is the hump in the top limb and you can see how good the bottom looks.
Pappy
[attachment deleted by admin]
Pappy:
Well I finely got the twins finished this weekend,got the skins on the last one ,sealed and the grips on both.Here is a couple of pictures,I will have more this week when I get a chance.They turned out nice One is 53@26 and the other is 52@26 and shoot very nice. :)All 3 of these came from the same stave.2 from the top and the third was a belly split off of it.Got lucky it all worked out. :)
Pappy
[attachment deleted by admin]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version