Main Discussion Area > Bows

Nocking point

<< < (2/4) > >>

Coo-wah-chobee:
               Tie a tiny piece of rawhide, tiny meanin small diameter on string where ya want nock point. Make sure rawhide is good an wet, use 2 overhand knots. Tie tight and let dry. Cut ends off when dry, done an wont move.......bob

cowboy:
Thanks fellers! their's several way's to try it - I'll tinker with em all and figure out which works for me ;D.

david w.:
i fixed the nocking point on my compound bow's string by using Kevlar fly tying thread.  Then I put a drop of glue on it.  It work great.  All i did was keep wrapping till I got the right size nocking point on it

GregB:

I usually use waxed dental floss...wrapping to get the diameter you want, then finishing with a serving knot. A drop of super glue as already mentioned and you're set. ;)

Hillbilly:
I once put a "temporary" duct tape nock point on one of my bows that's been on there for three or four years now....... :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page