Author Topic: Latest Batch of Knives  (Read 4981 times)

0 Members and 1 Guest are viewing this topic.

Offline 4est Trekker

  • Member
  • Posts: 311
Latest Batch of Knives
« on: June 14, 2011, 12:47:40 am »
Here's a few I just finished, all from reclaimed saw steel and etched in vinegar/lemon juice.  The first is a drop point caper with a clay quench and slight hamon. It's 6 inches overall with a 2.5" blade, streaked buffalo horn scales, piened copper tube pins, and a homemade mosaic pin.  The other two blades are just a few more tiny neck knives in zebra wood and streaked buffalo horn with piened copper tube pins. Thanks for looking...critique always welcome.











"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Re: Latest Batch of Knives
« Reply #1 on: June 14, 2011, 12:56:04 am »
Classy work, as usual 4est.  Pretty hard to citique that :)

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Latest Batch of Knives
« Reply #2 on: June 14, 2011, 01:28:32 am »
Very, very nice!
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Latest Batch of Knives
« Reply #3 on: June 14, 2011, 02:22:23 am »
beautiful knives 4est. no critique here either.
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline bobnewboy

  • Member
  • Posts: 329
  • https://www.flickr.com/photos/bob_d14/
    • The Company of Sixty Field Archers
Re: Latest Batch of Knives
« Reply #4 on: June 14, 2011, 09:09:07 am »
Absolutely top notch work.  Wish I could do some more like that.

//Bob
"The Englishman takes great pride in his liberty. He values this gift more than all the joys of life, and would sacrifice everything to retain it. The populace would have you understand there is no country in the world where such perfect freedom can be enjoyed, as in England!" Frenchman, London 1719

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Latest Batch of Knives
« Reply #5 on: June 14, 2011, 09:39:20 am »
Beautiful work!
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,116
  • if you have to ask you wouldn't understand ,Tenn.
Re: Latest Batch of Knives
« Reply #6 on: June 14, 2011, 10:56:38 am »
Sweet batch of knives. :) :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Will H

  • Member
  • Posts: 2,120
Re: Latest Batch of Knives
« Reply #7 on: June 14, 2011, 11:31:54 am »
 ;D Those are exquisite!  ;D
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Latest Batch of Knives
« Reply #8 on: June 14, 2011, 12:40:56 pm »
Very nice work as usual, 4est. I love the copper tube rivets. Anything special about "peening" them in place?
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline 4est Trekker

  • Member
  • Posts: 311
Re: Latest Batch of Knives
« Reply #9 on: June 17, 2011, 12:07:58 am »
Thanks for the kind comments, all.  Pat, I used 1/8" copper tubing.  I cut it about about a 1/4" long (1/8" overhang per side), scruff it up with sandpaper, and then tap it into place with some gel superglue for added strength.  Then, I take a roofing nail that I've sanded the point to a smooth cone on and alternately pien both sides.  I have a small 1 lb. anvil that works great for this application.  I go back and forth until I've sufficiently spread the opening of the tubing on both sides.  Then I sand it flush with the scales, pien them a few more times, and sand them flush again. 

Hope that helps. :)
"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline JW_Halverson

  • Member
  • Posts: 11,915
Re: Latest Batch of Knives
« Reply #10 on: June 17, 2011, 02:11:09 pm »
Exquisite workmanship, 4est.  Beauty and functionality in equal doses!

That first one with the spiderweb design on the sheath would go well with my spiderweb shooting pouch, hint hint.

I always appreciate your posts of these knives, especially the one with the backwoods engraving trick. 
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Latest Batch of Knives
« Reply #11 on: June 17, 2011, 04:29:18 pm »
I really like your knives, I especially like the design of the neck knives' sheaths.  I have a problem coming up with a way to build an upside-down sheath that the knife will actually stay in so I do the pouch with the knife handle sticking up.  Did you come up with that design?  Mind if I borrow it for my next knife?  Really top notch work!   :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Latest Batch of Knives
« Reply #12 on: June 17, 2011, 04:46:42 pm »
Those are great, I love the groves on the back of the blade, they are very artistic.
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Lombard

  • Guest
Re: Latest Batch of Knives
« Reply #13 on: June 18, 2011, 09:26:10 am »
4est, wicked nice work.