Main Discussion Area > Bows
Just Another Bow
Ryano:
The top limb does have a slightly hingy apearence top it right out at the tip. The bottum looks fine to me. :) Some times you can do every thing right and still get fretts with white wood. :P I wouldnt worry about it to much, just start another! ;D
Badger:
A good thing to keep in mind when tillering a bow is that the thickness determines how far a piece of wood can safely bend, the width will determine how far that piece of wood will bend. Both are equally important. Steve
OldBow:
I agree with Pappy. Not Worthy?????? ??? Only if you say so. Any bow with a tiller as good as this one is certainly worthly.
DanaM:
Don I consider it not worthy because with the fretting I don't believe its going to last.
I think a bow for the BOM should have a good tiller but also it should be durable.
This bow looks nice, but as someone else said I'd rather have an ugly durable bow than a pretty bow I can't rely on!
Badger thanks for the advice I need to start considering the width of my bows more.
Hillbilly:
Looks like a pretty nice bow to me.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version