« previous next »
Pages: [1]

Author Topic: Soon to be pyramid limbed molly...  (Read 1845 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
Soon to be pyramid limbed molly...
« on: July 11, 2011, 01:13:14 pm »
It's 1 1/2" wide at the fades to 1/2" wide at the lever fades...,  1/2" consistent thickness, around 62" long I think total. I'm thinking about putting about 2 layers of sinew on it. I figure that would make a pretty fast bow.









« Last Edit: July 11, 2011, 01:19:04 pm by toomanyknots »
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

blackhawk

  • Guest
Re: Soon to be pyramid limbed molly...
« Reply #1 on: July 11, 2011, 01:27:38 pm »
What type of wood is it? It looks cool. If you sinew then just feather it out just over the fades of the levers(but you prob got that figured out)   the sinew and that design will def put a lot of strain on the belly. Hope you have a compression strong wood,otherwise that might want to fret if not tillered carefully. Can't wait to see what happens with your next conncotion.  :D
Logged

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: Soon to be pyramid limbed molly...
« Reply #2 on: July 11, 2011, 01:36:29 pm »
Think you are missing a navel ring bro...  :o
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline Rick Wallace

  • Member
  • Posts: 766
Re: Soon to be pyramid limbed molly...
« Reply #3 on: July 11, 2011, 02:50:03 pm »
Quote from: Lee Slikkers on July 11, 2011, 01:36:29 pm
Think you are missing a navel ring bro...  :o
   ;D ;D ;D  Trailor hitch  ;D ;D ;D   
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Soon to be pyramid limbed molly...
« Reply #4 on: July 11, 2011, 03:31:41 pm »
"Think you are missing a navel ring bro..."

LOL  ;D

"What type of wood is it?"

Well red oak of course,  ;D. I got some linen too if I get to lazy to sinew. But of course the grain is quite good enough to just leave it unbacked if I wanted too. That is if I am very lazy. I back every board bow I do though anymore. I got a sapwood backed osage molly in the works too right now, wideth at the lever fades are a bit more (like a 1/4" more or so) but the design is roughly the same.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair
Pages: [1]
« previous next »