Main Discussion Area > HowTo's and Build-a-longs

Close Up View of "How to chase a single back ring."

(1/3) > >>

Almostpighunter:
I was in the process and decided to pull out the video recorder. Seen a lot of videos on this but no close up views on how each layer can look or how to know when you have reached a single ring. Obviously, I figured it out after trial and error and thought this might clear it up for some others. The link to the video is below:

http://www.youtube.com/watch?v=z8aRn9dXxE0

cracker:
Cool vid should be helpful to some of the new folks.Ron

Bryce H:
Great video

Bohunter0908:
Hey Mike
That's another good informative vid
I actually built my first bow from one of your vids
good stuff great for us newbies
  -Bo-
  Laporte TEXAS

NCtrucker87:
Thanks for posting, this will really helpme on my upcoming first bow. I do have one question though. On the belly( not sure if this is the right term) of the limbs, the parts facng you if the bow were drawn...does that part need to be one growth ring too? Or is it only important on the face?
Thanks

Navigation

[0] Message Index

[#] Next page