« previous next »
Pages: [1]

Author Topic: Making a knife handle from deer leg  (Read 4008 times)

0 Members and 1 Guest are viewing this topic.

remington22

  • Guest
Making a knife handle from deer leg
« on: August 15, 2011, 12:30:35 am »
I have a question? and would like some help. Which leg, the front and back leg do you use for making a handle for a flint knife. Would someone post a picture and how they made the handle. Any information would be helpful. Thanks Tom
Logged

Online Pappy

  • Global Moderator
  • Member
  • Posts: 31,837
  • if you have to ask you wouldn't understand ,Tenn.
Re: Making a knife handle from deer leg
« Reply #1 on: August 15, 2011, 09:51:38 am »
I use front or rear ,usually the lower bone. I will see if I can find a picture, I just cut a slot in it and halt it like I would an arrow point.  :) :)
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline aaron

  • Member
  • Posts: 1,037
Re: Making a knife handle from deer leg
« Reply #2 on: August 15, 2011, 02:13:35 pm »
i cut a slot in the bone and enlarged it with a dremmel. then glue the point in. then wrap with wet rawhide strip. let dry overnight and painted it. The knife blade has a tang which is just as wide as the bone (or a tiny bit wider). this tang is the full length of the wrapping.
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"
Pages: [1]
« previous next »