« previous next »
Pages: [1]

Author Topic: Spear making/ throwing???  (Read 4374 times)

0 Members and 1 Guest are viewing this topic.

Offline HickoryBill

  • Member
  • Posts: 785
Spear making/ throwing???
« on: November 20, 2011, 07:46:04 pm »
Any of you guys ever get into spear making and throwing? I don't mean atlatls( As those are darts) I mean a long shaft with a a head thrown with just the arm.If so what materials have worked the best... thanks
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,520
Re: Spear making/ throwing???
« Reply #1 on: November 20, 2011, 09:33:57 pm »
Bill, I collected, dried and heat straightened 2 sourwood shoots that are about 6' to 7'long. My intension was to add a metal point made from bandsaw blade material but I haven't gotten that far. I think almost any tree shoot growth would give you a nice heavy spear handle. Bamboo would also.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Spear making/ throwing???
« Reply #2 on: November 20, 2011, 10:43:09 pm »
Pat B what diameter do you feel is appropriate for spears? 
Logged
Aim Small...Hit Small

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,520
Re: Spear making/ throwing???
« Reply #3 on: November 21, 2011, 01:27:09 am »
The best of the two I cut is 1 1/8" at the base end and 3/4" at the small end and is about 6 1/2' long. The other is a bit smaller diameter but longer.  These might be more of a lunging type spear than a throwing type.  I was thinking hog hunting when the idea came to me.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline johnston

  • Member
  • Posts: 976
Re: Spear making/ throwing???
« Reply #4 on: November 21, 2011, 02:55:07 am »
I was also thinking hogs when I built a couple of heads from the leaf springs off an old
trailer. Got the idea from reading Peter Hathaway Capstick. That fool threw and stuck
a Cape buffalo with one.

My best spear was made from the blade of an well used machete. Cut it to shape with
a cutting disc on a dremel and filed it to final dimensions. Hafted it to a one inch piece
of bamboo footed with dogwood. About 6 ft in total length and definitely not a toy.

Lane
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,520
Re: Spear making/ throwing???
« Reply #5 on: November 22, 2011, 12:50:33 am »
Lane, that is about what I was thinking of.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline HickoryBill

  • Member
  • Posts: 785
Re: Spear making/ throwing???
« Reply #6 on: November 23, 2011, 10:24:34 pm »
THANKS GUYS!!!  I think I'll give it a whirl. I'll try to get some pics up when I get some good results. Wonder what would make a good cheap target for a spear???.....
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Spear making/ throwing???
« Reply #7 on: November 23, 2011, 11:32:22 pm »
the side of a neighbors house >:D
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,520
Re: Spear making/ throwing???
« Reply #8 on: November 24, 2011, 01:46:35 am »
Noel, I doubt Bill could chunk it that far!  ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Spear making/ throwing???
« Reply #9 on: November 24, 2011, 01:55:52 am »
he can borrow one of my bows, although the spear might be a little small for them ::)
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline HickoryBill

  • Member
  • Posts: 785
Re: Spear making/ throwing???
« Reply #10 on: November 24, 2011, 11:04:43 pm »
My next door neighbor's house is really close so..........lol >:D >:D >:D
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania

blackhawk

  • Guest
Re: Spear making/ throwing???
« Reply #11 on: November 24, 2011, 11:38:00 pm »
If u get it made by sat ,then u need to take it with u to jons for our lil bowyer party ;)
Logged
Pages: [1]
« previous next »